For the interior in the Japanese style with wall covering, you can use the panel of bamboo. They represent the layers of wood boards of bamboo glued together. Panels can have from one to five layers, depending on the quality and cost of the coating. After gluing panels on wall they can be covered with varnish. In the living room this is not necessary, as the bamboo itself does not attract dust and there are no specific pollutants in the bedrooms or living rooms. Exceptions are the places around switches and outlets. From the frequent use around them may appear shiny, greasy spots. This can be avoided by covering the wall near the breakers varnish (diameter lacquered surface shall not be less than 7.8 inches).
“To start with, you need to research the various alternatives of wood panel walls to find out which ones will best meet your needs.” Read the fresh review about wood panels, bamboo panels and other wall decoration materials on moderndecorstore.net.
The walls of the kitchen or hallway advisable to varnish. It is better to use a water-based compositions. For bathrooms and toilets use two-component parquet lacquers. Such coverage will not only protect the bamboo from pollution, but prevent it cracking. You can spray varnish on walls with a gun, or use a rollers for it. If you want to inject some color to bamboo panels, it is best to use for this color lakes. In this case, select to use synthetic stain and not water-based.
Besides bamboo panels for wall paneling in the living rooms are often used whole or sawn along the trunk of the plants. Necessary to divide them into sections, you can use a handsaw for wood or circular saw. To prevent adding chips, place cut seal the paper tape. Trunks used for bonding decorative jute rope.
Bamboo is a reliable and durable material, but its use must comply with certain rules. The panels and trunks do not tolerate extremes of humidity and temperature, so they are not recommended for the walls of lavatories and kitchens. Attaching bamboo near a heater, and on the surface, brightly illuminated by the sun, do not advised. Otherwise, the material is split very quickly. Bamboo is very picky to the level of humidity in the room. If it is below 80%, the material can crack easily. Maintain the required conditions are quite simple. Barrels must be covered with a layer of protective varnish, and wrap the ends of jute and plug the dense matter. This will help keep the stems inside the desired level of humidity. In addition, with the same purpose in the bamboo cavity can be filled with polyurethane.
In addition to compliance with the temperature and the moisture saving mode, you must also protect the bamboo or wood panels from mechanical influences. This relates primarily to conditions of storage this material. Trunks and panels must be storing in a horizontal position. It is best to use a clean, slightly damp and antistatic cloth to clean the surface of bamboo panels.